|
|
|
|
|
|
|
Above Ground Polypropylene Oil Water Separator |
|
Now, this breakthrough in environmental clean-up technology is available in a lightweight, polypropylene housing. This polypropylene oil/water separator (#MPP-11) is flexible, cost-effective, and up to the challenge — wherever oil and water hit the floor. |
|
|
|
|
|
|
|
|
|
|
MAS Series Aboveground Oil Water Separators
|
|
MAS Series, Facet Coalescent Plates Separators are designed to treat hydrocarbon water. These separators can be fed by gravity or pumped. These separators carry out separation by physical means, do not require consumables and have no mobile parts. |
|
|
|
|
|
|
|
|
|
|
MCS Series Aboveground Oil Water Separators |
|
Facet's MCS (MPak Circular Flow Separator) Series oil/water separators are designed to handle either gravity or pumped flow on a single pass or re-circulatory basis. There are no moving parts to fail or require expensive maintenance as they are equipped with Facet's patented MPak® coalescing plates. |
|
|
|
|
|
|
|
|
|
|
CPS 3.2E + EBM 14x1 Bilge Water Separator |
|
CPS 3.2E+ EBM 14x1 unit removes hydrocarbons in two stages. In the first stage, free hydrocarbon is separated from water through FACET patented coalescent plate packs. iI the second stage, emulsions are broken by a membrane which removes emulsified hydrocarbon, resulting in an effluent with total hydrocarbon content of less than 15 ppm.
|
|
|
|
|
|
|
|
|
|
|
CPS B MK III + EBM 14x Bilge Water Separator |
|
CPS BMKIII + EBM 14x equipment removes hydrocarbons in two stages. In the first stage, free hydrocarbon is separated from water through Facet's patented coalescent plate packs. In the second stage, emulsions are broken by a membrane which removes emulsified hydrocarbon, reaching down an effluent with total hydrocarbon content of less than 15 ppm. |
|
|
|
|
|
|
|
|
|
|
CPS 3.2E + EMB Bilge Water Separator |
|
CPS 3.2E + EMB equipment removes hydrocarbons in two stages. In the first stage, free hydrocarbon is separated from water through Facet's patented coalescent plate packs. In the second stage, emulsions are broken by a membrane which removes emulsified hydrocarbon resulting in effluent with total hydrocarbon content of less than 5 ppm. |
|
|
|
|
|
|
|