 |
Schultz
DP Gauge is a direct reading piston type
differential pressure indicator designed to accurately and reliably
read differential pressure across filter vessels. The gauge
consists of a spring supported corrosion resistant piston moving
inside an annealed glass cylinder. Differential pressure is
easily read form the top of the sight glass. Pressure tested to
1200 psi to withstand normal operating pressure of 300 psi.
Available on aluminum or stainless steel housings in two ranges
available 0-15 psi and 0-30 psi. |
|
|
|
Schulz DP Gauge with
Go-No-Go Scale simplifies reading the gauge.
With this gauge a quick glance of the gauge verifies if
differential pressure is in the Go (safe)
or No-Go (danger) range
reducing operator work load during fueling operations. Three types
of GNG scales are available on the standard Schultz DP Gauge.
Custom scales can be designed for your
unique application. Call us today. |
|
|
 |
Schultz Automatic DP
Gauge is a direct reading piston type
differential pressure indicator designed to accurately and reliably
read differential pressure across filter vessels. The automatic DP
Gauge uses a sealed solid state sensor with the ability to
electronically detect high differential pressure. The high DP alert
setting can be easily adjusted in the field. The system is
Intrinsically Safe (IS) Explosion-Proof and is suitable for use in
Class 1, Division 1, Hazardous Locations as defined in Articles
500 and 504 of the National Electrical Code. 18 month limited
warranty. Available on aluminum or stainless steel housings in two
ranges available 0-15 psi and 0-30 psi with four power options. |
|
|
 |
Schultz 3-Way Differential Pressure
Test Valve is designed to allow a hydraulic
test movement of the DP gauge piston. This is done by venting the
lower piston chamber, and allowing the line pressure to drive the
piston into its maximum low position. Observe the piston's
movement during the test to ensure smooth and continuous
operation. |
|
|
 |
Schultz QD Couplings are
available in aluminum and stainless steel. Both versions feature
poppets and springs along with Viton O-Rings. QD couplings are
designed to handle pressures up to 1600 PSI and are available with
an optional dust cap and retention chain. All QD couplings feature
1/4" pipe size passages. They accept existing manufacturers
actuators and are configured in kits for fuel sampling operations. |
|
|
 |
Schultz
Accu-Sample™ Aviation Fuel Sampling Port has
been developed with the ASTM Aviation Fuel Particulate
Contamination Test Method D 2276 in mind. The Accu-Sample Quick
Disconnect surpasses existing designs by eliminating multiple
connections and recesses where contaminate, particulate and/or
sediment might be trapped. This ensures accurate sampling and the
highest level of reliability for uncontaminated samples when
conducting fuel tests. |
|
|
 |
Schultz Gauge Guard™
This patent pending design allows a safe installation of a
pressure gauge onto a Whittaker (F-116 or F-117) single point
nozzle without any modifications to the nozzle itself. During
fueling the gauge is visible through stainless steel Gauge
Guard™. When closed, the gauge is retracted into the guard
protecting it from possible damage. |
|
|
