|
  |
 |
Hilliard Cartridges
Quik-Pik Cartridge Selection Table |
| |
Series |
Description |
Cartridges |
|
Beta Rating |
|
| Bulletin |
Center Posts |
Flowmax
3 psi∆ 200SUS |
 |
PPC-2 |
MicrogardTM
Pleated
Paper Cartridges |
3" x 10" to 7" x 36" |
|
Beta5
=75 |
| ¾" to 3" |
SafegardTM
Pleated
Paper Cartridges |
3" x 10" to 7" x 36" |
|
Beta14
to 58 =200 |
| ¾" to 3" |
 |
PHI-2 |
Synthetic Media Cartridge
(O-ring gasket) |
3" x
10" to 7" x 39" |
|
Beta
4 to 51 = 200 |
|
¾" to 3" |
|
PHI-2 |
Synthetic Media Cartridge
(flat gasket) |
3" x
10" to 7" x 36" |
|
¾" to 2" |
 |
PHI-12 |
Synthetic Media Cartridge |
|
High flow cartridge replace existing
cartridges with improved efficiency, lower pressure drop |
Beta
1 to 25 = 200 |
 |
PHI-5 |
High Flow Synthetic
Cartridge |
PH720 |
6¼" x 19
15/16" |
High flow cartridges
reduce costs and space |
Beta
4 to 51 = 200 |
| PH739 |
6¼" x 39
5/8" |
 |
HPS-1 |
High Pressure Hydraulic
Fluid Filter Cartridges |
3" x 11" to 3" x 21" |
Eliminate system problems caused by
elements collapsing under high differential pressure |
Beta
4 = 200 |
 |
BFC-1 |
Bag Filter Cartridge |
Size 1
Size 2 |
Pleated bag filter cartridge is more
efficient than traditional "sock" filters in bag housings |
Beta
4 to 69 = 200
(4, 15, 25, 41, 51, 69) |
 |
|
Saflow™ and Saflow™ D
Stacked Disc Cartridges |
6" x 18" to 7" x 36" |
1½" |
|
|
SPD-1 (F-152-11) |
 |
HDI-2 |
Hilsorb™ Super Absorbent Dryer
Cartridges (media 03, 12) |
3" x 10" |
¾" to 3" |
Beta
4,
14, 28 = 200 |
| 5" x 11" |
|
|
| 7" x 18" |
|
|
|
The Hilco® Hilsorb™
Super-Absorbent Dryer Cartridge combines high efficiency particulate
filtration with high-capacity water absorption in a single pleated
cartridge. The Hilsorb™ cartridge excels in applications requiring
moisture control and high filtration efficiency such as insulating,
hydraulic, lube and fuel oils. |
 |
HLE-2 |
Hilite-E
Filter Cartridges |
|
Acid Control
Ion Exchange Resin |
|
|
|
|
The Hilite-E exchange cartridge line is based on the
existing filled cartridges. Instead of a traditional activated
adsorbent, the cartridge canister is filled with a dust-free ion
exchange resin specifically selected for acid adsorption. |
 |
HAC-3 |
Hilite-A Filter
Cartridges |
3" x 10" (1"), 5" x 11 (1-3/4"), 7" x
18"(2-1/2"), 11" x 19"(2-1/2) |
Acid Control
Activated Alumina |
|
|
|
|
Hilco developed Hilite-A, an activated alumina
filter media, for the adsorption of acids, alkalies, and other
oxidation products from synthetic fluids and petroleum oil. Hilite-A
cartridges remove acids from phosphate esters, pre-fluorinated
polyether (PFPE) and other expensive synthetic fluids far more
efficiently than fuller's earth. The activated alumina filter media
provides acid control with several times the neutralizing power
(by volume) of fuller's earth. |
 |
SEL-3 |
Selexsorb®
Acid Adsorber Cartridge |
3" x 10" (3/4"), 5" x 11 (1-3/4"), 7"
x 18"(2, 2-1/2"), 11" x 18"(2-1/4) |
Acid Control
Selexborb |
|
0.1 - 0.5 gpm |
|
|
Selexsorb GT is a patented adsorbent specifically
designed for use with Fyrquel gas turbine lube and hydraulic control
fluids. Another application is steam turbine EHC control industrial
hydraulic systems. The unique composition of this adsorbent
maintains the original, superior properties of these fluids for
prolonged periods. |