|
|
|
 |
 |
 |
|
Compact Filters and Strainers |
|
Nugent Compact Filters and Strainers are ideally suited for liquid
applications with flows to 50 gpm and design pressures to 200 PSI.
The simplex is composed of one drawn carbon steel housing secured to
a cast iron cover with four heavy-duty bolts. It contains one filter
element or strainer basket.
The duplex
incorporates two drawn carbon steel housings, each with one filter
element or strainer basket suspended from a common cast iron cover.
The shells are interconnected by a Nugent dual-circuit transfer
valve directing continuous flow to either shell independently or to
both in parallel. Options include steel covers, stainless steel
rotors, and all stainless steel construction. |
|
 |
 |
 |
|
ASME Code Filters and Strainers |
|
Nugent ASME Code Filters and Strainers are designed to meet the
exacting specifications dictated by OEM’s oil companies, and
engineering firms. Some standard features include: a) convenient
cover swing bolts for ease of maintenance, b) cover O-rings for a
leak-free cover seal, c) lifting davits for all covers over 85 lbs.
d) easy to read differential pressures gauges on all vessels 16’’ in
diameter and larger, and e) heavy duty carbon steel bodies with
ductile iron or steel covers. All pressure vessels are available in
stainless steel construction to withstand the most corrosive
environments.
Tailored to your
requirements, our filters and strainers can be designed to meet API
Specifications, MIL-Specs, NACE, ABS, USCG, and most engineering
standards. |
|
 |
 |
 |
 |
 |
Single 3-Port Transfer Valve |
|
Twin 3-Port Transfer Valve |
|
6-Port Transfer Valve Inlet Over Outlet |
|
6-Port Transfer Valve Inlet Over Outlet with 180º
Offset |
|
Zero Leakage Two-way Transfer Valves - 3-Port and 6-Port
Advance Designs |
|
These dual circuit, 3-port and 6-port transfer valves are designed
for assembly between filters, strainers, and heat exchangers where
continuous service and positive shut-off are necessary. These valves
feature an exclusive internal quad-ring design, eliminating
side-to-side leakage even at test pressures to 1000 PSI. The
operation of our Zero Leakage Transfer Valve is much simpler than
other valves because there are no pads to seat and unseat and no
locking pins to lift. Our internal arrangement is free of all
springs, pins, and levers that break loose and cause severe damage
to the costly equipment it was meant to protect. After equalizing
the pressure, simply rotate the handle to transfer the fluid from
one vessel to the other. Available in 1-1/2”, 2”, 3”, 4” sizes.
Designed for operating pressures to 665 PSI. A steel body and iron
rotor are standard; stainless steel rotors or all stainless steel
construction is optional. |
|
